The Ball Engine Company
The Ball Engine Company was founded, by F. H. Ball and W. H. Nicholson, in Erie in 1883 to manufacture stationary industrial steam engines. Recognizing that the market for such engines was maturing it began manufacturing steam shovels in 1914. This diversification took place following a conversation between Ball’s vice president Fred McBrier and A.C. Vicary, a salesman for Thew Shovel. Vicary had some forward-thinking ideas about improving the design, manufacture and marketing of steam shovels, and Ball hired him and applied his ideas.
Ball used the name of its hometown as the trade name for its shovel line, as did Thew with its Lorain machines. Ball initially produced only two models, the 1/2-yard model A and the 3/4-yard B. The thinking behind this was to minimize costs by simplifying and streamlining manufacturing and service through the use of standardized, mass-produced parts that were interchangeable between the two models.
Oddly, the Erie B’s introduction predated that of the A by about a year. The A and B could both be mounted on crawlers or steel traction wheels, and the B was also available with railroad wheels. The B could be set up as a shovel with various combinations of booms and dipper sticks for general, overburden, railroad ditching, or open-trench excavation. It could also be outfitted as a crane or dragline, although it had limitations as a dragline due to the low line pull typical of steam excavators.
The Erie A and B were aggressively promoted, and their design concepts proved so successful that Ball dominated the small-excavator market. Ball Engine spun off its stationary steam engine lines in 1920 and became Erie Steam Shovel in 1922. The Erie B was replaced in 1925 by the B-2 Dreadnaught, a 7/8-yard excavator that was intended to be a transitional machine into the internal combustion excavators that were rendering steam obsolete.
Bucyrus of South Milwaukee, Wisconsin, had also achieved considerable success with steam excavators, but had only a small share of the market for small machines such as the Erie A and B. To rectify this, Bucyrus merged with Erie to form Bucyrus-Erie in 1927, following Erie’s reorganization the year before under a new board that included two members of the Bucyrus board of directors.
All production of Bucyrus-Erie small excavators was consolidated into the Erie plant, which remained open until 1984, when it was closed and sold as part of Bucyrus-Erie’s restructuring into a manufacturer solely of surface mining machinery consequent to the recession of the early 1980s. Bucyrus-Erie was renamed Bucyrus International in 1996; in 2011, Bucyrus was acquired by Caterpillar and became Caterpillar Global Mining.
Ball used the name of its hometown as the trade name for its shovel line, as did Thew with its Lorain machines. Ball initially produced only two models, the 1/2-yard model A and the 3/4-yard B. The thinking behind this was to minimize costs by simplifying and streamlining manufacturing and service through the use of standardized, mass-produced parts that were interchangeable between the two models.
Oddly, the Erie B’s introduction predated that of the A by about a year. The A and B could both be mounted on crawlers or steel traction wheels, and the B was also available with railroad wheels. The B could be set up as a shovel with various combinations of booms and dipper sticks for general, overburden, railroad ditching, or open-trench excavation. It could also be outfitted as a crane or dragline, although it had limitations as a dragline due to the low line pull typical of steam excavators.
The Erie A and B were aggressively promoted, and their design concepts proved so successful that Ball dominated the small-excavator market. Ball Engine spun off its stationary steam engine lines in 1920 and became Erie Steam Shovel in 1922. The Erie B was replaced in 1925 by the B-2 Dreadnaught, a 7/8-yard excavator that was intended to be a transitional machine into the internal combustion excavators that were rendering steam obsolete.
Bucyrus of South Milwaukee, Wisconsin, had also achieved considerable success with steam excavators, but had only a small share of the market for small machines such as the Erie A and B. To rectify this, Bucyrus merged with Erie to form Bucyrus-Erie in 1927, following Erie’s reorganization the year before under a new board that included two members of the Bucyrus board of directors.
All production of Bucyrus-Erie small excavators was consolidated into the Erie plant, which remained open until 1984, when it was closed and sold as part of Bucyrus-Erie’s restructuring into a manufacturer solely of surface mining machinery consequent to the recession of the early 1980s. Bucyrus-Erie was renamed Bucyrus International in 1996; in 2011, Bucyrus was acquired by Caterpillar and became Caterpillar Global Mining.
 |
| Bucyrus Erie half-yard Drag Shovel at Bucyrus-Erie, the northeast corner of 12th and Weschler Streets. |